topblog Ivoire blogs


The way to replace ICOM firmware

Car or truck buffs own in most cases established a lot more gauges by way of example a lot more void battery pack hottest and lots of some others. That OBD frequent program signifies a fresh technologies regarding fanatic instrumentation being able to view all the variety of car or truck details used with regard to diagnostics, in addition to produced details by way of example instant fuel fiscal conditions. OBD-II will be an progress with regards to OBD-I within every capacity in addition to.

Etc . in direction of reliable difficulties sometime rapidly men and women think about, internet marketing a good experiment, men and women think about malfunctioning injector, to be a functioning verify, you possibly can verify than a conjecture tend to be correct. Release X431 SLEEPING PAD Service several G/WIFI connection and also the Net to spot. is any especially designed analysis instrument with regard to auto-grade professionals. Sleek and stylish key system, successful analysis capabilities, rapid in addition to effortless replace, general connectors, ensure it is the initial choice with regard to professionals. X431 PAD will be the hottest products with regard to professionals.

The way to replace ICOM firmware?
1. Connect ICOM A2 device with computer via network cable while connect the ICOM A2 interface into the BMW OBD port to charge power supply.
2. Brose the IE Internet Exploer, launch :, thean login with username/password: root/NZY1150263
3. Select and click “Update Firmware”, ICOM firmware version information will display on the program.
4. Open “ICOM-BootImage-01-13-00.bin” file and set image type to SYSTEM, click “Send the file”.
5. Click “Yes” when “Write the image file to the flash” message displays. Wait for the ICOM indicator light turn red.
6 Click “Update Firmware” button when “The SYSTEM IMAGE update was successful” notice pops out.
7. Select and open “ICOM-ApplicationImage-01-18-00.bin”, set image type to APPLICATION, click “Send the file”. The process will takes some time, please wait patiently.
8. Click “Yes” when “Write the image file to the flash” message displays. Wait for the ICOM indicator light turn red.
9 Click “Reboot” when the upgrade procedure is complete.

Les commentaires sont fermés.